common
F.A.Q.
Bạn có thể kiểm tra các vấn đề hoặc sử dụng các sản phẩm bằng cách tự chẩn đoán.
ifpd
When the touch slowly responses when you write pictures or text.
If the setting value of the function to soften lines is low, please set it high.
Check if the graphics card driver and USB driver are correctly installed.
USB device not be recognized appears on the screen in normal connection.
Please reconnect the USB cable or reboot the PC.
Check if the software is installed correctly.
If the hardware fails, please contact the seller.
When a certain function does not work under normal connection.
It is a phenomenon of light interference caused by foreign substances.
Remove the foreign object by wiping it with a smooth cotton with alcohol and calibrate the touch position.
When drawing a line under normal conditions, there is a slight tremble on the line.
When the sun is too strong, it hides the sunlight.
Please change the nib when the thickness of the nib is larger than 8mm.
If the setting value of the function to soften lines is low, please set it high.
When the mouse cursor goes around on the screen in normal connection.
It is a phenomenon of light interference caused by foreign substances.
Remove the foreign object by wiping it with a smooth cotton with alcohol.
If the product has been severely deformed, please contact the seller and send it to the factory.
Line breaks when drawing a line In normal connection.
It is a phenomenon of light interference caused by foreign substances.
Remove the foreign object by wiping it with a smooth cotton with alcohol.
If the product has been severely deformed, please contact the seller and send it to the factory.
When the touch position is NOT correct
Check if there is any foreign object on the screen.
If there is water or foreign object on the surface of the screen, wipe it with a clean, soft surface.
Make sure your computer OS is genuine. It does not work on some OEM windows.
Perform “Reset” in “Table PC Settings” of the control panel.
If the “Reset” button is gray, first perform “Calibrate” and then “Reset.”
If the screen is in portrait mode, the multi-touch function is limited.
When multi-touch function does not work.
If the pen does not support multi-touch, replace it with the pen which supports multi-touch.
Please check Windows versions that support multi-touch function.
Windows OS that supports multi-touch function
Window7 Home Basic, Vista Enterprise, Vista Business Edition,Window XP,Mac OS X
Windows OS that does not support multi-touch function
Vista Home Basic, Vista Ultimate
When touch function does not work.
Put your finger on the center of the touch screen for 3 seconds, then check if the function is working.
Check if the touchscreen setup menu opens and the hardware chip version and software are same.
If it is different, please install the software again.
Check if the last version was completely deleted and if neccesary, delete the folder in which the last version files were downloaded and connect the usb cable before reinstalling the software.
How to check if IFPD is connected to your PC.
Start -> Computer -> system attribute -> Device Manager -> usb device
Check if your software is stopped by an antivirus program.
Check if the window version supports multi-touch function.
If the window version does not support multi-touch, use mouse mode.
Giá cả phải chăng nhất
Bạn có muốn…
MONITOR
When only 16 colors are displayed on the screen
When the color of the screen changes after you replace the video card
A. Check if your PC Window OS color option is correct and your video card is set up properly.
B. If you are using Windows Me, 2000 and XP, select the correct color in “Control Panel”, “Display”, “Settings”.
Please refer to the graphics card manual.
If the screen does not turn on
A. Make sure the power button on the monitor and computer is turned on.
B. Make sure the signal cable is securely connected to the video card.
C. Verify that the computer is in the power-saving state. “NO SIGNAL”, “OUT OF RANGE” appear on the screen.
D. Press any key on the keyboard or move the mouse to activate the screen. In case of “OUT OF RANGE”, enter VGA mode and use VGA mode.
A. Check if the USB cable is properly connected to the USB port on your computer.
B. Check the charging status of the pen.
C. Reinstall the driver.
When the color of the screen doesn’t seem right.
Adjust with ODS color adjustment menu.
When the screen is blurry
Adjust the contrast and brightness.
The screen is not in the center of the monitor and appears too small or too large.
Perform automatic adjustment.
When the screen is unstable
Check that the signal cable of the monitor is properly connected to the video card.
When the power indicator light isn’t turned on
Check if the power button on the monitor is turned on.
Check if the power cord of the monitor is properly connected.
When nothing appears on the screen
A. Check if the power button on the monitor and computer is turned on.
B. Check if the cable is properaly connected to the video card.
C. Check if the D-sub cable pin is not bent.
D. Check if the computer is in a power saving state.
Perform automatic adjustment and adjust the phase until no noise is generated.
(Check if the frequency adjustment is 50%.)
